QuinTech Brennstoffzellen Technologie
Research & Development
Test Equipment
Fuel Cells & Cells
• PEM Single Cells
• Labor Fuel Cell Stack
• Fuel Cell Stack
• quickCONNECT pneumatic
• DMFC & EMFC
• Liquid FC Hardware
• Phosphoric Acid Fuel Cells
• Redox Flow Battery
• MFC & Microbial
• Conductivity Cells
• Electrolysis Cells
Reformer
Components
Accessories
Cutting Dies & Presses
Education & Demonstration
Application
Special Offer
Technical Information
 
 
 
quickCONNECT pneumatic
Description:
The quickCONNECTfixture qCf is an invaluable tool in research and development and strong demands of quality assurance. All kinds of PEM fuel cell internal components, like membranes, electrodes and CCMs, MEAs, GDLs can be checked very easily. Enabling fully reproducible test conditions, the contact pressure on the active fuel cell area (25, 50 cm²) can be regulated directly via pneumatic actuator. Flow fields, both standard designs and custom-made, can easily be exchanged. Besides the basic models FC 25/100 and FC 50/125, qCf is also available as customised solution with different active fuel cell areas and other customer specific demands.

fit for service qCf 25 cm² and 50 cm² active fuel cell area
• quality assurance
• reproducibility
• quick & easy assembly
• increased productivity

1 - easy dismounting of cellFixture from SFPU



2 - exchange of cell internal compo- nents (no tools needed) assembly of cellFixture via quick clamping



3 - mounting of cellFixture into SFPU applying of pressure impact to the active fuel cell area (start measuring)
qCf innovative cell concept
The cross-section of a cellFixture below helps to understand the principle of a qCf. The pressure impact of the pneumatic actuator is applied directly to the active fuel cell area in the cellFixture.

 

MEAs, CCMs, GDLs, GDEs etc.

SFPU – support frame pressure unit; will be fully connected to the test-stand environment cF cellFixture – for easy integration of specimens like MEAs, CCMs, GDLs, GDEs, etc.
• maximum power density by determination of optimum contact pressure on active area
• continuously adjustable contact pressure assures full reproducibility of test conditions
• independence of thickness of internal fuel cell components by self adjusting piston and spe- cial sealing concept
• no hose coupling and electrical writing for replacement of cellFixture required
• highly comfortable operation and easy assembly of cellFixture into support frame pressure unit SFPU - 1st is running, 2nd can be fitted with new components
• time saving assembly due to quick release and automatic plug connections
• quick and easy clamping / assembly of cellFixture without tools and precise exchange of cell internal components
• designed for strong demands in the area of quality assurance and lab environments

quickCONNECT fixture FC25/100: 25 cm² active Fuel Cell area,
Ø 100 mm pneumatic drive force impact:

qCf FC25/100 V1.1
quickCONNECTfixture Type: FC25/100
Electrical Heated RT → 200 °C

• air-pressurized support frame pressure unit: max. impact force at 8 bar air pressure: 6,28 kN; 616 kg; 1412 lbf
• heating elements: 200 W/24 VDC; fully integrated in gold plated heating plates ensures pre-heating of media
• main connecting plug: interface to heating power and temperature sensor connection
• main switch to open/close of qCf; integrated 5/2 way-valve for piston control (open/close) and heaters (on/off)
• temperature sensor Pt1000 integrated (integration of thermocouple type K on request)
• load connection: 6 mm low ohmic MultiContact ports (anode and cathode side)
• media/fuel/oxidant connection: 6 mm Swagelok fitting; Ø 4 mm for pneumatic piston/air supply
• dimensions: 320 x 160 x 160 mm; weight: 5,9 kg; working diameter of „pneumatic piston drive“: 100 mm

Delivery includes:
• qCf frame unit (SFPU)
• main connection plug (heaters & temperature sensor - 6 pins)
• electronic load connectors MultiContact 6 mm (max. 150 A)
• manual
Optionally available:
→ Temperature Control Unit
(TCU 500)

quickconnect
Price:
3.975,-

qCf FC25/100 LC V1.1
quickCONNECTfixture Type: FC25/100 LC
Liquid cooled (heated) - 40 ° → 200 °C

• air-pressurized support frame pressure unit: max. impact force at 8 bar air pressure: 6,28 kN; 616 kg; 1412 lbf
• heating/colling: fully integrated heating/cooling layers in gold plated heating plates; very low temperature Gradient
• operating temperature: - 40 ° up to 180 °C (200 °C short term); temperature control via lab-thermostat
• externally lab-thermostat enables deep-freeze cycling and high-temperature measurements in one setup
• main switch to open/close of qCf; integrated 5/2 way-valve for piston control (open/close)
• liquid connectors for thermostat: 6 mm PTFE/teflon tubes
• load connection: 6 mm low ohmic MultiContact ports (anode and cathode side)
• media/fuel/oxidant connection: 6 mm Swagelok fitting; Ø 4 mm for pneumatic piston/air supply
• dimensions: 320 x 160 x 160 mm; weight: 5,9 kg; working diameter of „pneumatic piston drive“: 100 mm

Delivery includes:
• qCf frame unit (SFPU)
• plug (temp. Sensor) – 6 pins
• electronic load connectors MultiContact 6 mm (max. 150 A)
• cooling media tubes (PTFE 6 mm)
• manual
Optionally available:
→ Lab Thermostat „ministat“ (HUBER)
→ Temp.-Sensor for „ministat“ (Pt100 external)

quickconnect
Price:
3.695,-

cF25/100 LT Gr V1.3
cellFixture cF low temperature; graphite; only use in qCf FC25/100 - 40 ° → 130 °C

• active fuel cell area: 50 x 50 mm → 25 cm² in square; max. operating temperature: 130°C
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“; no tools needed - fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 - highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 120 x 100 x 50 mm; weight: 1,6 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 25/100)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
2.760,-

cF25/100 HT Gr V1.3
cellFixture cF high temperature; graphite; only use in qCf FC25/100 - 40 ° → 200 °C

• active fuel cell area: 50 x 50 mm → 25 cm² in square; max. operating temperature: 180°C (200°C short term)
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“ no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 120 x 100 x 50 mm; weight: 1,6 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 25/100)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
2.960,-

cF25/100 HT Gr PEEK V1.3
cellFixture cF high temperature; graphite; only use in qCf FC25/100 - 40 ° → 200 °C

• novel concept of cellFixture; high stable construction material and novel sealing-concept
• active fuel cell area: 50 x 50 mm → 25 cm² in square; max. operating temperature: 180°C (200°C short term)
• fuels/oxidants: hydrogen, ethanol, methanol, reformte/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: PEEK - thermoplastic, highly chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 120 x 100 x 50 mm; weight: 1,5 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 25/100)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
3.250,-

cF5/100 HT Gr V1.2
cellFixture cF high temperature; graphite; only use in qCf FC25/100 - 40 ° → 200 °C

• active fuel cell area: 22,3 x 22,3 mm → 5 cm² in square; max. operating temperature: 180°C (200°C short term)
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 120 x 100 x 50 mm; weight: 1,6 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 5/100 – on request)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
2.850,- €

cF25/100 BT V1.2
cellFixture cF Battery Testing; graphite; only use in qCf FC25/100

• active fuel cell area: 25 x 25 mm → 25 cm² in square; max. operating temperature: 180°C (200°C short term)
• anode side: solid anode materials as inlays; oxidant: air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/battery components: 2,5 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced (low tendency to distortion), chemically stable
• flow-field design cathode: 5-fold serpentine structure (customized Flow Field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 120 x 100 x 50 mm; weight: 1,6 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
2.760,- €

cF25/100 LT CSS V1.3
cellFixture CSS; with integrated current distrubution sensor & electronics
- 20 ° → 100 °C

• integrated current distribution sensor – Current Scan Shunt; manufacturer: S++ Simulation Services/ Germany
• similar construction, design and material as cF25/100 LT; cF is already equipped with sensor device/shunt res.
• resolution of sensor-array: 10 x 10 active sensor elements for current-distribution;
5 x 5 for temperature distribution
• interface to electronic board for „in-situ measurements“ of current distribution and temperature distribution
• included software currentVIEW allows to log, determine and plot the results 3-dimensional over fuel cell area
• active fuel cell area: 25 x 25 mm → 25 cm² in square; max. operating temperature: 100°C
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions without electronics: appr. 120 x 210 x 50 mm; overall weight including electronics: appr. 3,3 kg

Delivery includes:
• cellFixture cF_CSS (already mounted and ready for installation)
• fully integrated sensor-device in cF
• 2 electronic boards
• USB-interface
• User-interface
• software currentVIEW
• instruction installations
• manual

quickconnect
Price:
18.400,- €

cF25/100 HT CSS V1.3
cellFixture CSS; with integrated current distrubution sensor & electronics
- 20 ° → 100 °C
• integrated current distribution sensor – Current Scan Shunt; manufacturer: S++ Simulation Services/ Germany
• similar construction, design and material as cF25/100 HT; cF is already equipped with sensor device/shunt res.
• resolution of sensor-array: 10 x 10 active sensor elements for current-distribution;
5 x 5 for temperature distribution
• interface to electronic board for „in-situ measurements“ of current distribution and temperature distribution
• included software currentVIEW allows to log, determine and plot the results 3-dimensional over fuel cell area
• active fuel cell area: 25 x 25 mm → 25 cm² in square; max. operating temperature: 180°C (200 °C short term)
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions without electronics: appr. 120 x 210 x 50 mm; overall weight including electronics: appr. 3,3 kg

Delivery includes:
• cellFixture cF_CSS (already mounted and ready for installation)
• fully integrated sensor-device in cF
• 2 electronic boards
• USB-interface
• User-interface
• software currentVIEW
• instruction installations
• manual

quickconnect
Price:
18.400,- €

quickCONNECT fixture FC50/125: 50 cm² active Fuel Cell area,
Ø 125 mm pneumatic drive force impact:

qCf FC50/125 V1.1
quickCONNECTfixture Type: FC50/125
Electrical Heated RT → 200 °C

• air-pressurized support frame pressure unit: max. impact force at 8 bar air pressure: 9,82 kN; 963 kg; 2208 lbf
• heating elements: 300 W/24 VDC; fully integrated in gold plated heating plates ensures pre-heating of media
• main connecting plug: interface to heating power and temperature sensor connection
• main switch to open/close of qCf; integrated 5/2 way-valve for piston control (open/close) and heaters (on/off)
• temperature sensor Pt1000 integrated (integration of thermocouple type K on request)
• load connection: 6 mm low ohmic MultiContact ports (anode and cathode side)
• media/fuel/oxidant connection: 6 mm Swagelok fitting; Ø 4 mm for pneumatic piston/air supply
• dimensions: 350 x 180 x 180 mm; weight: 8,6 kg; working diameter of „pneumatic piston drive“: 125 mm

Delivery includes:
• qCf frame unit (SFPU)
• main connection plug (heaters & temperature sensor - 6 pins)
• electronic load connectors MultiContact 6 mm (max. 150 A)
• manual
Optionally available:
→ Temperature Control Unit (TCU 500)

quickconnect
Price:
5.435,- €

qCf FC50/125 LC V1.1
quickCONNECTfixture Type: FC50/125 LC
Liquid Colled (heated) - 40 ° → 200 °C

• air-pressurized support frame pressure unit: max. impact force at 8 bar air pressure: 9,82 kN; 963 kg; 2208 lbf
• heating/cooling: fully integrated heating/cooling layers in gold plated heating plates; very low temperature Gradient
• operating temp.: - 40°C up to 180 °C (200°C short term); temperature control via lab-thermostat
• externally lab-thermostat enables deep-freeze cycling and high-temperature measurements in one setup
• main switch to open/close of qCf; integrated 5/2 way-valve for piston control (open/close)
• liquid connectors for thermostat: 6 mm PTFE/teflon tubes
• load connection: 6 mm low ohmic MultiContact ports (anode and cathode side)
• media/fuel/oxidant connection: 6 mm Swagelok fitting; Ø 4 mm for pneumatic piston/air supply
• dimensions: 350 x 180 x 180 mm; weight: 8,6 kg; working diameter of „pneumatic piston drive“: 125 mm

Delivery includes:
• qCf frame unit (SFPU)
• plug (temperature sensor) - 6 pins
• electronic load connectors MultiContact 6 mm (max. 150 A)
• cooling media tubes (PTFE 6 mm)
• manual
Optionally available:
→ Lab Thermostat „ministat“ (HUBER)
→ Temp.-Sensor for „ministat“ (Pt100 external)

quickconnect
Price:
4.390,- €

cF50/125 LT Gr V1.2
cellFixture cF low temperature; graphite; only use in qCf FC50/125 - 40 ° → 130 °C

• active fuel cell area: 71 x 71 mm → 50 cm² in square; max. operating temperature: 130°C
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed - fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 - highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 130 x 150 x 55 mm; weight: 2,7 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 50/125)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
4.750,- €

cF50/125 HT Gr V1.2
cellFixture cF high temperature; graphite; only use in qCf FC50/125 - 40 ° → 200 °C

• active fuel cell area: 71 x 71 mm → 50 cm² in square; max. operating temperature: 180°C (200°C short term)
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 130 x 150 x 55 mm; weight: 2,7 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 50/125)
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
5.478,- €

cF50/125 HT Gr PEEK V1.3
cellFixture cF high temperature; graphite; only use in qCf FC50/125 - 40 ° → 200 °C
• novel concept of cellFixture; high stable construction material and novel sealing-concept
• active fuel cell area: 71 x 71 mm → 50 cm² in square; max. operating temperature: 180°C (200°C short term)
• fuels/oxidants: hydrogen, ethanol, methanol, reformate/ air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 – highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: PEEK - thermoplastic, highly chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 130 x 150 x 55 mm; weight: 2,7 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• manual
Optionally available:
→ Dyn. Hydr. Ref. Electrode (DHRE 50/125)
→ Flow-Field-Set incl. CAD (customized designs on request)

quickconnect
Price:
5.895,- €

cF50/125 LT CSS V1.2
cellFixture CSS; with integrated current distrubution sensor & electronics
- 20 ° → 100 °C
• integrated current distribution sensor – Current Scan Shunt; manufacturer: S++ Simulation Services/ Germany
• similar construction, design and material as cF50/125 LT; cF is already equipped with sensor device/shunt res.
• resolution of sensor-array: 12 x 12 active sensor elements for current-distribution;
6 x 6 for temperature distribution
• interface to electronic board for „in-situ measurements“ of current distribution and temperature distribution
• included software currentVIEW allows to log, determine and plot the results 3-dimensional over fuel cell area
• active fuel cell area: 71 x 71 mm → 50 cm² in square; max. operating temperature: 100°C
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions without electronics: appr. 130 x 220 x 55 mm; overall weight including electronics: appr. 3,4 kg

Delivery includes:
• cellFixture cF_CSS (already mounted and ready for installation)
• fully integrated sensor-device in cF
• 4 electronic boards
• USB-interface
• software currentVIEW
• instruction installations
• manual

quickconnect
Price:
22.480,- €

cF50/125 HT CSS V1.2
cellFixture CSS; with integrated current distrubution sensor & electronics
- 20 ° → 180 °C
• integrated current distribution sensor – Current Scan Shunt; manufacturer: S++ Simulation Services/ Germany
• similar construction, design and material as cF50/125 HT; cF is already equipped with sensor device/shunt res.
• resolution of sensor-array: 12 x 12 active sensor elements for current-distribution;
6 x 6 for temperature distribution
• interface to electronic board for „in-situ measurements“ of current distribution and temperature distribution
• included software currentVIEW allows to log, determine and plot the results 3-dimensional over fuel cell area
• active fuel cell area: 71 x 71 mm → 50 cm² in square; max. operating temperature: 180°C (200 °C short term)
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions without electronics: appr. 130 x 220 x 55 mm; overall weight including electronics: appr. 3,4 kg

Delivery includes:
• cellFixture cF_CSS (already mounted and ready for installation)
• fully integrated sensor-device in cF
• 4 electronic boards
• USB-interface
• User-interface
• software currentVIEW
• instruction installations
• manual

quickconnect
Price:
22.480,- €

quickCONNECT fixture FC100/400: 100 cm² active Fuel Cell area,
4 pneumatic pistons with each Ø 100 mm pneumatic drive force impact:

qCf FC100/400 LC V1.1
quickCONNECTfixture Type: FC100/400 LC
Liquid Cooled (heated) - 40 ° → 200 °C
• air-pressurized support frame pressure unit: max. impact force at 8 bar air pressure: 9,82 kN; 963 kg; 2208 lbf
• pressure/force impact through 4 parallel pneumatic drives; working-diameter 4 x Ø 100 mm (piston Ø each)
• heating/cooling: fully integrated heating/cooling layers in gold plated heating plates; very low temperature Gradient
• operating temperature: - 40°C up to 180 °C (200°C short term); temperature control via lab-thermostat
• externally lab-thermostat enables deep-freeze cycling and/or high-temperature measurements in one setup
• main switch to open/close of qCf; integrated 5/2 way-valve for piston drive (open/close)
• liquid connectors for thermostat: 8 mm PTFE/teflon tubes
• load connection: 14 mm low ohmic MC-MultiContact ports (anode and cathode side)
• media/fuel/oxidant connection: 8 mm Swagelok fitting; Ø 4 mm for pneumatic piston/air supply
• dimensions: 500 x 350 x 300 mm; weight: 28 kg

Delivery includes:
• qCf frame unit (SFPU)
• plug (temp. sensor) - 6 pins
• electronic load connectors MultiContact 14 mm (max. 250 A)
• cooling media tubes (PTFE 8 mm)
• installation instruction
• manual
Optionally available:
→ Lab Thermostat "ministrat" (HUBER)
→ Temp.-sensor for "ministrat" (Pt100 external)

quickconnect
Price:
9.750,- €

cF100/400 HT Gr V1.3
cellFixture cF high temperature; graphite; only use in qCf FC100/400 LC
- 40 ° → 200 °C
• active fuel cell area: 100 x 100 mm → 100 cm² in square; max. operating temperature: 180 °C (200 °C short term)
• fuels/oxidants: hydrogen, methanol, reformate/air, O2; max. back pressure max. 2 bar
• opening/closing of cellFixture via „stud bolts“; screw threaded - fast and precise exchange and operation
• gold plated monopolar/contact plates; base material 1.4571 - highest corrosion protected stainless steel
• max. thickness of specimens/fuel cell components: 2 mm (max. traverse path of moving stamp/moving die)
• sealing material: Viton/FKM; sealings can be changed very easy (other sealing materials on request)
• interface ports: sense contact ports (anode & cathode potential) and additionally temperature-sensor bore 2 mm
• housing material: EPGC308 - epoxi-resin, glas-fiber, reinforced, no tendency to distortion, chemically stable
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions: 190 x 190 x 55 mm; weight: 6,5 kg

Delivery includes:
• cellFixture cF (mounted and ready for installation)
• sense plugs red and black incl. wire leads
• flat-sealing set (PTFE)
• installation instructions
• manual
Optionally available:
→ Flow-Field-Set incl. CAD-serv. (customized designs on request)

quickconnect
Price:
10.150,- €

cF100/400 HT CSS
cellFixture CSS; with integrated current distribution sensor & electronics
- 20 ° → 180 °C
• integrated current distribution sensor – Current Scan Shunt; manufacturer: S++ Simulation Services/ Germany
• unique construction and design; cF is already equipped with sensor device/shunt res.
• resolution of sensor-array: 16 x 16 active sensor elements for current-distribution;
8 x 8 for temperature distribution
• interface to electronic board for „in-situ measurements“ of current distribution and temperature distribution
• included software currentVIEW allows to log, determine and plot the results 3-dimensional over fuel cell area
• active fuel cell area: 100 x 100 mm → 100 cm² in square; max. operating temperature: 180°C (200 °C short term)
• opening/closing of cellFixture via „pop-up-clamps“, no tools needed – fast and precise exchange and operation
• flow-field design: 5-fold serpentine structure (customized flow field designs on request)
• flow-field material: graphite compound (specific flow-field materials on request)
• dimensions without electronics: appr. 190 x 270 x 55 mm; overall weight including electronics: appr. 7,6 kg

Delivery includes:
• cellFixture cF_CSS (already mounted and ready for installation)
• fully integrated sensor-device in cF
• 4 electronic boards
• USB-interface and USB-hub
• User-interface
• voltage supply
• software currentVIEW
• instruction installations
• manual

quickconnect
Price:
33.169,- €

 

 



Print page      
         
SEARCH

Hannover Messe 2019

Meet us at HANNOVER MESSE, April 1-5, 2019 ...
more »

 
 
Hannover Messe 2018

Meet us at HANNOVER MESSE, April 23-27, 2018 ...
more »

 
 

QuinTech
Fuel Cell Technology
Danziger Straße 8
DE-73035 Goeppingen

phone +49 (0)71 61 / 94 63 18
fax +49 (0)71 61 / 94 63 19
e-mail: quintech@quintech.de